DC Central WHATS HOT Whats New Retired Community Museums Submissions 
   Welcome   Links   Safety Center  INSURV  Annoucements  Twitter  Advisor Group  Retirees   Contractors  
                                 
maritime DC & PPE Information Center

EQUIPMENT

Band it Kit

 

The Band-It Kit is used for temporary repairs to fluid system piping up to 4 inches in diameter where operating temperatures are 250º F or less. The pressure contained depends on the size of the pipe; the type, size, and shape of the hole; the surface condition of the pipe; the number of straps applied; and the skill of the user. A good rule of thumb to follow is the larger the pipe diameter and the hole size, the lower the pressure that can be contained. Gaskets are preglued to the strongbacks to prevent the use of the wrong material, lost time under adverse conditions, or gasket material slipping off during installation of the patch. The contents of the bank-it kit are inventoried using AEL 2-880043002.

CLAMP,PLIER,CHAIN

(Chain Wrench)

CLAMPING TOOL,STRAP (Clamping Tool)

GLOVES, DIVERS  

(Cut-Resistant Gloves)

QTY 4

AVAIL

QTY 1

AVAIL

QTY 2

AVAIL

Kit Bag

(Band-It Kit Bag)

PIPE,METALLIC,PRECU

(Strongback)

Rubber Sheet, Solid 1sh

(Rubber Sheet)

QTY 1

AVAIL

QTY 6

AVAIL

QTY 1

AVAIL

EMPTY

SEAL,STRAPPING

(Band-It Buckles)

  STRAPPING /CONTAINER

(Steel Strapping and Container)

 
QTY 1 AVAIL QTY 1 AVAIL    
Information about the kit's contents can be found by clicking on individual items in the image's above.