DC Central WHATS HOT Whats New Retired Community Museums Submissions 
   Welcome   Links   Safety Center  INSURV  Annoucements  Twitter  Advisor Group  Retirees   Contractors  
                                 
maritime DC & PPE Information Center
 

Equipment

Damage Control Material Kit

 

The Damage Control Material Kit contains material for temporary patching of ruptured lines in low-pressure fluid systems. The contents of the material bag are inventoried using AEL 2-880043003 after each use to establish which items need replacement. The size and shape of the rupture, and the pressure and temperature of the system fluid determine the choice of patching material. These patches can be applied quickly to a wet line; however, the patches are limited to pressures not greater than 125 psig.

The wood included in the material bag should not be painted. Unpainted soft wood absorbs more water and grips better. 

       

Kit Bag - Material

Lockwire, 16 gauge

 (Lock Wire)

Plug, Wood, Conical Tapered, 3in. Lg x 1in. Max Dia

 (3 inch plug)

QTY 1

AVAIL

QTY 2

AVAIL

QTY 1

AVAIL

 

 

Plug, Wood, Conical Tapered, 4in. Lg x 2in. Max Dia

(4 inch plug)

Plug, Wood, Conical Tapered, 8in. Lg x 3in. Max Dia

(8 inch plug)

Plug, Wood, Conical Tapered, 10in. Lg x 5in. Max Dia

(10 inch plug)

QTY 5

AVAIL

QTY 3

AVAIL

QTY 1

AVAIL

 

 

 

Rubber, Sheet

3ft. X 3ft., solid

(Rubber sheet)

Metal, Sheet 12" w x 72" lg x 1/16 thk

(Metal sheet)

Spun Yarn - Hemp

(Marline)

QTY 1

AVAIL

QTY 1

AVAIL

QTY 1

AVAIL

 

 

Wedge, Wood, 1½" x 3"

(1 1/2 inch wedge)

Wedge, Wood, 2" x 4"

(2 inch wedge)

QTY 2

AVAIL

QTY 2

AVAIL

Information about the kit's contents can be found by clicking on individual items in the image's above.